实战:上亿数据如何秒查(转)

最近在忙着优化集团公司的一个报表。优化完成后,报表查询速度有从半小时以上(甚至查不出)到秒查的质变。从修改SQL查询语句逻辑到决定创建存储

过程实现,花了我3天多的时间,在此总结一下,希望对朋友们有帮助。

数据背景

首先项目是西门子中国在我司实施部署的MES项目,由于项目是在产线上运作(3 years+),数据累积很大。在项目的数据库中,大概上亿条数据的表有5个以上,千万级数据的表10个以上,百万级数据的表,很多...

(历史问题,当初实施无人监管,无人监控数据库这块的性能问题。ps:我刚入职不久...)

不多说,直接贴西门子中国的开发人员在我司开发的SSRS报表中的SQL语句:

 1 select distinct b.MaterialID as matl_def_id, c.Descript, case when right(b.MESOrderID, 12) < ‘001000000000‘ then right(b.MESOrderID, 9)
 2 else right(b.MESOrderID, 12) end  as pom_order_id, a.LotName, a.SourceLotName as ComLot,
 3 e.DefID as ComMaterials, e.Descript as ComMatDes, d.VendorID, d.DateCode,d.SNNote, b.OnPlantID,a.SNCUST
 4 from
 5 (
 6     select m.lotname, m.sourcelotname, m.opetypeid, m.OperationDate,n.SNCUST from View1 m
 7     left join co_sn_link_customer as n on n.SNMes=m.LotName
 8     where
 9     ( m.LotName in (select val from fn_String_To_Table(@sn,‘,‘,1)) or (@sn) = ‘‘) and
10     ( m.sourcelotname in (select val from fn_String_To_Table(@BatchID,‘,‘,1)) or (@BatchID) = ‘‘)
11     and (n.SNCust like ‘%‘+ @SN_ext + ‘%‘ or (@SN_ext)=‘‘)
12 ) a
13 left join
14 (
15     select * from Table1 where SNType = ‘IntSN‘
16     and SNRuleName = ‘ProductSNRule‘
17     and OnPlantID=@OnPlant
18 ) b on b.SN = a.LotName
19 inner join MMdefinitions as c on c.DefID = b.MaterialID
20 left join  Table1 as d on d.SN = a.SourceLotName
21 inner join MMDefinitions as e on e.DefID = d.MaterialID
22 where not exists (
23  select distinct LotName, SourceLotName from ELCV_ASSEMBLE_OPS
24 where LotName = a.SourceLotName and SourceLotName = a.LotName
25 )
26 and (d.DateCode in (select val from fn_String_To_Table(@DCode,‘,‘,1)) or (@DCode) = ‘‘)
27 and (d.SNNote  like ‘%‘+@SNNote+‘%‘ or (@SNNote) = ‘‘)
28 and ((case when right(b.MESOrderID, 12) < ‘001000000000‘ then right(b.MESOrderID, 9)
29 else right(b.MESOrderID, 12) end) in (select val from fn_String_To_Table(@order_id,‘,‘,1)) or (@order_id) = ‘‘)
30 and (e.DefID in (select val from fn_String_To_Table(@comdef,‘,‘,1)) or (@comdef) = ‘‘)
31 --View1是一个嵌套两层的视图(出于保密性,实际名称可能不同),里面有一张上亿数据的表和几张千万级数据的表做左连接查询
32 --Table1是一个数据记录超过1500万的表

这个查询语句,实际上通过我的检测和调查,在B/S系统前端已无法查出结果,半小时,一小时 ... 。因为我直接在SQL查询分析器查,半小时都没有结果。

(原因是里面对一张上亿级数据表和3张千万级数据表做全表扫描查询)

不由感慨,西门子中国的素质(或者说责任感)就这样?

下面说说我的分析和走的弯路(思维误区),希望对你也有警醒。

探索和误区

首先相关表的索引,没有建全的,把索引给建上。

索引这步完成后,发现情况还是一样,查询速度几乎没有改善。后来想起相关千万级数据以上的表,都还没有建立表分区。于是考虑建立表分区以及数据复制的方案。

这里有必要说明下:我司报表用的是一个专门的数据库服务器,数据从产线订阅而来。就是常说的“读写分离”。

如果直接在原表上建立表分区,你会发现执行表分区的事物会直接死锁。原因是:表分区操作本身会锁表,产线还在推数据过来,这样很容易“阻塞”,“死锁”。

我想好的方案是:建立一个新表(空表),在新表上建好表分区,然后复制数据过来。

正打算这么干。等等!我好像进入了一个严重的误区!

分析: 原SQL语句和业务需求,是对产线的数据做产品以及序列号的追溯,关键是查询条件里没有有规律的"条件"(如日期、编号),

贸然做了表分区,在这里几乎没有意义!反而会降低查询性能!

好险!还是一步一步来,先做SQL语句分析。

一. 对原SQL语句的分析

1. 查询语句的where条件,有大量@var in ... or (@var =‘‘) 的片段

2. where条件有like ‘%‘[email protected]+‘%‘

3. where条件有 case ... end 函数

4. 多次连接同一表查询,另外使用本身已嵌套的视图表,是不是必须,是否可替代?

5. SQL语句有*号,视图中也有*号出现

二. 优化设计

首先是用存储过程改写,好处是设计灵活。

核心思想是:用一个或多个查询条件(查询条件要求至少输入一个)得到临时表,每个查询条件如果查到集合,就更新这张临时表,最后汇总的时候,

只需判断这个临时表是否有值。以此类推,可以建立多个临时表,将查询条件汇总。

这样做目前来看至少两点好处:1.省去了对变量进行 [email protected] or (@var=‘‘)的判断;

2.抛弃sql拼接,提高代码可读性。

再有就是在书写存储过程,这个过程中要注意:

1. 尽量想办法使用临时表扫描替代全表扫描;

2. 抛弃in和not in语句,使用exists和not exists替代;

3. 和客户确认,模糊查询是否有必要,如没有必要,去掉like语句;

4. 注意建立适当的,符合场景的索引;

5. 踩死 "*" 号;

6. 避免在where条件中对字段进行函数操作;

7. 对实时性要求不高的报表,允许脏读(with(nolock))。

三. 存储过程

如果想参考优化设计片段的详细内容,请参阅SQL代码:

  1 /**
  2  * 某某跟踪报表
  3  **/
  4 --exec spName1 ‘‘,‘‘,‘‘,‘‘,‘‘,‘‘,‘公司代号‘
  5 CREATE Procedure spName1
  6    @MESOrderID nvarchar(320), --工单号,最多30个
  7    @LotName nvarchar(700),    --产品序列号,最多50个
  8    @DateCode nvarchar(500),   --供应商批次号,最多30个
  9    @BatchID nvarchar(700),    --组装件序列号/物料批号,最多50个
 10    @comdef nvarchar(700),     --组装件物料编码,最多30个
 11    @SNCust nvarchar(1600),    --外部序列号,最多50个
 12    @OnPlant nvarchar(20)      --平台
 13 AS
 14 BEGIN
 15     SET NOCOUNT ON;
 16     /**
 17      * 1)定义全局的临时表,先根据六个查询条件的任意一个,得出临时表结果
 18      **/
 19     CREATE TABLE #FinalLotName
 20     (
 21         LotName NVARCHAR(50),       --序列号
 22         SourceLotName NVARCHAR(50), --来源序列号
 23         SNCust NVARCHAR(128)        --外部序列号
 24     )
 25     --1.1
 26     IF @LotName<>‘‘
 27     BEGIN
 28         SELECT Val INTO #WorkLot FROM fn_String_To_Table(@LotName,‘,‘,1)
 29         SELECT LotPK,LotName INTO #WorkLotPK FROM MMLots WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkLot b WHERE b.Val=MMLots.LotID)
 30
 31         --求SourceLotPK只能在这里求
 32         SELECT a.LotPK,a.SourceLotPK into #WorkSourcePK FROM MMLotOperations a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkLotPK b WHERE b.LotPK=a.LotPK) AND a.SourceLotPK IS NOT NULL
 33
 34         SELECT a.LotPK,a.SourceLotPK,b.LotName INTO #WorkSourcePK2 FROM #WorkSourcePK a JOIN #WorkLotPK b ON a.LotPK=b.LotPK
 35
 36         INSERT INTO #FinalLotName SELECT a.LotName,b.LotName AS SourceLotName,NULL FROM #WorkSourcePK2 a JOIN (SELECT LotPK,LotName FROM MMLots WITH(NOLOCK) ) b on a.SourceLotPK=b.LotPK --b的里面加不加WHERE RowDeleted=0待确定
 37         SELECT a.LotName,a.SourceLotName,b.SNCust INTO #FinalLotNameX1 FROM #FinalLotName a LEFT JOIN CO_SN_LINK_CUSTOMER b WITH(NOLOCK) ON a.LotName=b.SNMes
 38         DELETE FROM #FinalLotName
 39         INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #FinalLotNameX1
 40     END
 41     --1.2
 42     IF @BatchID<>‘‘
 43     BEGIN
 44         SELECT Val INTO #WorkSourceLot FROM fn_String_To_Table(@BatchID,‘,‘,1)
 45         IF EXISTS(SELECT 1 FROM #FinalLotName)--如果@LotName也不为空
 46         BEGIN
 47             SELECT a.LotName,a.SourceLotName,a.SNCust INTO #FinalLotNameX2 FROM #FinalLotName a WHERE EXISTS(SELECT 1 FROM #WorkSourceLot b WHERE a.SourceLotName=b.Val)
 48             DELETE FROM #FinalLotName
 49             INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #FinalLotNameX2
 50         END
 51         ELSE --@LotName条件为空
 52         BEGIN
 53             SELECT LotPK AS SourceLotPK,LotName AS SourceLotName INTO #2 FROM MMLots WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkSourceLot b WHERE b.Val=MMLots.LotID)
 54             SELECT a.LotPK,a.SourceLotPK into #21 FROM MMLotOperations a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #2 b WHERE b.SourceLotPK=a.SourceLotPK)
 55             SELECT a.LotPK,a.SourceLotPK,b.SourceLotName INTO #22 FROM #21 a JOIN #2 b ON a.SourceLotPK=b.SourceLotPK
 56             INSERT INTO #FinalLotName SELECT b.LotName,a.SourceLotName,NULL FROM #22 a JOIN (SELECT LotPK,LotName FROM MMLots WITH(NOLOCK) ) b on a.LotPK=b.LotPK --b的里面加不加WHERE RowDeleted=0待确定
 57             SELECT a.LotName,a.SourceLotName,b.SNCust INTO #FinalLotNameX21 FROM #FinalLotName a LEFT JOIN CO_SN_LINK_CUSTOMER b WITH(NOLOCK) ON a.LotName=b.SNMes
 58             DELETE FROM #FinalLotName
 59             INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #FinalLotNameX21
 60         END
 61     END
 62     --1.3
 63     IF @SNCust<>‘‘
 64     BEGIN
 65         SELECT Val INTO #WorkCustomSN FROM fn_String_To_Table(@SNCust,‘,‘,1)
 66         IF EXISTS(SELECT 1 FROM #FinalLotName)--前面两个条件至少有一个有值
 67         BEGIN
 68             SELECT a.LotName,a.SourceLotName,a.SNCust INTO #FinalLotNameX3 FROM #FinalLotName a WHERE EXISTS(SELECT 1 FROM #WorkCustomSN b WHERE a.SNCust=b.Val)
 69             DELETE FROM #FinalLotName
 70             INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #FinalLotNameX3
 71         END
 72         ELSE
 73         BEGIN
 74             SELECT a.SNMes INTO #WorkLotX FROM CO_SN_LINK_CUSTOMER a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkCustomSN b WHERE a.SNCust=b.Val)
 75             -------------------以下逻辑和变量1(@LotName)类似[先根据外部序列号求解序列号,再照搬第一个判断变量的方式]
 76             SELECT LotPK,LotName INTO #WorkLotPKX FROM MMLots WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkLotX b WHERE b.SNMes=MMLots.LotID)
 77
 78             --求SourceLotPK只能在这里求
 79             SELECT a.LotPK,a.SourceLotPK into #WorkSourcePKX FROM MMLotOperations a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkLotPKX b WHERE b.LotPK=a.LotPK) AND a.SourceLotPK IS NOT NULL
 80
 81             SELECT a.LotPK,a.SourceLotPK,b.LotName INTO #WorkSourcePK2X FROM #WorkSourcePKX a JOIN #WorkLotPKX b ON a.LotPK=b.LotPK
 82
 83             INSERT INTO #FinalLotName SELECT a.LotName,b.LotName AS SourceLotName,NULL FROM #WorkSourcePK2X a JOIN (SELECT LotPK,LotName FROM MMLots WITH(NOLOCK) ) b on a.SourceLotPK=b.LotPK --b的里面加不加WHERE RowDeleted=0待确定
 84             SELECT a.LotName,a.SourceLotName,b.SNCust INTO #FinalLotNameX31 FROM #FinalLotName a LEFT JOIN CO_SN_LINK_CUSTOMER b WITH(NOLOCK) ON a.LotName=b.SNMes
 85             DELETE FROM #FinalLotName
 86             INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #FinalLotNameX31
 87             -----------------------
 88         END
 89     END
 90
 91     /**
 92      * 2)定义全局的临时表,用于替换第一个全局临时表。
 93      **/
 94     CREATE TABLE #FinalCO_SN
 95     (
 96         SN NVARCHAR(50),
 97         SourceSN NVARCHAR(50),
 98         SNCust NVARCHAR(128),
 99         matl_def_id NVARCHAR(50),--sn的物料ID
100         ComMaterials NVARCHAR(50),  --SourceSN的物料ID
101         MESOrderID NVARCHAR(20),
102         OnPlantID NVARCHAR(20),
103         VendorID NVARCHAR(20),
104         DateCode NVARCHAR(20) ,
105         SNNote NVARCHAR(512)
106     )
107     --2.1
108     IF @MESOrderID<>‘‘
109     BEGIN
110         -------------------------------将MESOrderID做特殊处理-----------------------------------
111         SELECT Val INTO #WorkMESOrderID FROM fn_String_To_Table(@MESOrderID,‘,‘,1)
112         IF @OnPlant=‘Comba‘
113         BEGIN
114             UPDATE #WorkMESOrderID SET Val=‘C000‘+Val WHERE LEN(Val)=9
115         END
116         ELSE
117         BEGIN
118             UPDATE #WorkMESOrderID SET Val=‘W000‘+Val WHERE LEN(Val)=9
119         END
120         SELECT SN,MaterialID,MESOrderID,OnPlantID INTO #WorkCO_SN1 FROM CO_SN_GENERATION a WITH(NOLOCK)
121         WHERE SNType=‘IntSN‘ AND SNRuleName = ‘ProductSNRule‘ AND OnPlantID=@OnPlant
122         AND EXISTS(SELECT 1 FROM #WorkMESOrderID b WHERE a.MESOrderID=b.Val)
123         ------------------------------------------------------------------------------------------
124         --条件判断(逻辑分析)开始
125         IF EXISTS(SELECT 1 FROM #FinalLotName)--如果前面判断的查询条件有值
126         BEGIN
127             --查出SourceLotName对应的查询字段

128             SELECT a.SN AS SourceLotName,a.VendorID,a.DateCode,a.SNNote,a.MaterialID AS ComMaterials INTO #SourceLotNameTable FROM CO_SN_GENERATION a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.SourceLotName)
129
130             INSERT INTO #FinalCO_SN
131             SELECT a.LotName,a.SourceLotName,d.SNCust,b.MaterialID,c.ComMaterials,b.MESOrderID,b.OnPlantID,c.VendorID,c.DateCode,c.SNNote FROM #FinalLotName a
132             LEFT JOIN #WorkCO_SN1 b ON a.LotName=b.SN
133             LEFT JOIN #SourceLotNameTable c ON a.SourceLotName=c.SourceLotName
134             LEFT JOIN CO_SN_LINK_CUSTOMER d WITH(NOLOCK) ON a.LotName=d.SNMes
135         END
136         ELSE
137         BEGIN
138             --已知SN集合求解对应的SourceSN和SNCust集合------------------------------------------
139             SELECT LotPK,LotName INTO #WorkLotPK410 FROM MMLots WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkCO_SN1 b WHERE b.SN=MMLots.LotID)
140             SELECT a.LotPK,a.SourceLotPK into #WorkSourcePK420 FROM MMLotOperations a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkLotPK410 b WHERE b.LotPK=a.LotPK) AND a.SourceLotPK IS NOT NULL
141             SELECT a.LotPK,a.SourceLotPK,b.LotName INTO #WorkSourcePK430 FROM #WorkSourcePK420 a JOIN #WorkLotPK410 b ON a.LotPK=b.LotPK
142             INSERT INTO #FinalLotName SELECT a.LotName,b.LotName AS SourceLotName,NULL FROM #WorkSourcePK430 a JOIN (SELECT LotPK,LotName FROM MMLots WITH(NOLOCK) ) b on a.SourceLotPK=b.LotPK --b的里面加不加WHERE RowDeleted=0待确定
143
144             SELECT a.LotName,a.SourceLotName,b.SNCust INTO #FinalLotNameX440 FROM #FinalLotName a LEFT JOIN CO_SN_LINK_CUSTOMER b WITH(NOLOCK) ON a.LotName=b.SNMes
145             DELETE FROM #FinalLotName
146             INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #FinalLotNameX440
147             -------------------------------------------------------------------------------------
148             SELECT a.SN AS SourceLotName,a.VendorID,a.DateCode,a.SNNote,a.MaterialID AS ComMaterials INTO #SourceLotNameTable2 FROM CO_SN_GENERATION a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.SourceLotName)
149
150             INSERT INTO #FinalCO_SN
151             SELECT a.LotName,a.SourceLotName,a.SNCust,b.MaterialID,c.ComMaterials,b.MESOrderID,b.OnPlantID,c.VendorID,c.DateCode,c.SNNote FROM #FinalLotName a
152             LEFT JOIN #WorkCO_SN1 b ON a.LotName=b.SN
153             LEFT JOIN #SourceLotNameTable2 c ON a.SourceLotName=c.SourceLotName
154         END
155     END
156     --2.2
157     IF @DateCode<>‘‘
158     BEGIN
159         SELECT Val INTO #WorkDateCode FROM fn_String_To_Table(@DateCode,‘,‘,1)
160         --此@DataCode条件求解出来的是SourceSN
161         SELECT SN AS SourceSN,MaterialID AS ComMaterials,VendorID,DateCode,SNNote INTO #WorkSourceSNT1 FROM CO_SN_GENERATION a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkDateCode b WHERE a.DateCode=b.Val)
162         ----------------------------------------------------------------------------------------------------
163         --条件判断(逻辑分析)开始
164         IF EXISTS(SELECT 1 FROM #FinalCO_SN)--如果前面判断的查询条件有值
165         BEGIN
166             SELECT a.LotName,a.SourceLotName,a.SNCust,a.MaterialID,a.ComMaterials,a.MESOrderID,a.OnPlantID,a.VendorID,a.DateCode,a.SNNote INTO #TMP51 FROM #FinalCO_SN a WHERE EXISTS (SELECT 1 FROM #WorkDateCode b WHERE a.DateCode=b.Val)
167             DELETE FROM #FinalCO_SN
168             INSERT INTO #FinalCO_SN SELECT LotName,SourceLotName,SNCust,MaterialID,ComMaterials,MESOrderID,OnPlantID,VendorID,DateCode,SNNote FROM #TMP51
169         END
170         ELSE
171         BEGIN
172             IF EXISTS(SELECT 1 FROM #FinalLotName)
173             BEGIN
174             --查出SourceLotName对应的查询字段
175             SELECT a.SourceSN,a.VendorID,a.DateCode,a.SNNote,a.ComMaterials INTO #SourceLTX5 FROM #WorkSourceSNT1 a WHERE EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SourceSN=b.SourceLotName)
176             --查出SN对应的查询字段
177             SELECT SN,MaterialID,MESOrderID,OnPlantID INTO #WorkSNT510 FROM CO_SN_GENERATION a WITH(NOLOCK)
178             WHERE SNType=‘IntSN‘ AND SNRuleName = ‘ProductSNRule‘ AND OnPlantID=@OnPlant
179             AND EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.LotName)
180
181             INSERT INTO #FinalCO_SN
182             SELECT a.LotName,a.SourceLotName,d.SNCust,b.MaterialID,c.ComMaterials,b.MESOrderID,b.OnPlantID,c.VendorID,c.DateCode,c.SNNote FROM #FinalLotName a
183             LEFT JOIN #WorkSNT510 b ON a.LotName=b.SN
184             LEFT JOIN #WorkSourceSNT1 c ON a.SourceLotName=c.SourceSN
185             LEFT JOIN CO_SN_LINK_CUSTOMER d WITH(NOLOCK) ON a.LotName=d.SNMes
186
187             END
188             ELSE
189             BEGIN
190                 --已知SourceSN集合求解对应的SN和SNCust集合------------------------------------------
191                 SELECT LotPK AS SourceLotPK,LotName AS SrouceLotName INTO #WorkLotX510 FROM MMLots WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkSourceSNT1 b WHERE b.SourceSN=MMLots.LotID)
192                 SELECT a.LotPK,a.SourceLotPK into #WorkLotX520 FROM MMLotOperations a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkLotX510 b WHERE b.SourceLotPK=a.SourceLotPK)
193                 SELECT a.LotPK,a.SourceLotPK,b.SrouceLotName INTO #WorkLotX530 FROM #WorkLotX520 a JOIN #WorkLotX510 b ON a.SourceLotPK=b.SourceLotPK
194
195                 INSERT INTO #FinalLotName SELECT b.LotName,a.SrouceLotName,NULL FROM #WorkLotX530 a JOIN (SELECT LotPK,LotName FROM MMLots WITH(NOLOCK) ) b on a.LotPK=b.LotPK --b的里面加不加WHERE RowDeleted=0待确定
196
197                 SELECT a.LotName,a.SourceLotName,b.SNCust INTO #WorkLotX540 FROM #FinalLotName a LEFT JOIN CO_SN_LINK_CUSTOMER b WITH(NOLOCK) ON a.LotName=b.SNMes
198                 DELETE FROM #FinalLotName
199                 INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #WorkLotX540
200                 -------------------------------------------------------------------------------------
201                 SELECT SN,MaterialID,MESOrderID,OnPlantID INTO #WorkLotX550 FROM CO_SN_GENERATION a WITH(NOLOCK)
202                 WHERE SNType=‘IntSN‘ AND SNRuleName = ‘ProductSNRule‘ AND OnPlantID=@OnPlant
203                 AND EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.LotName)
204
205                 INSERT INTO #FinalCO_SN
206                 SELECT a.LotName,a.SourceLotName,a.SNCust,b.MaterialID,c.ComMaterials,b.MESOrderID,b.OnPlantID,c.VendorID,c.DateCode,c.SNNote FROM #FinalLotName a
207                 LEFT JOIN #WorkLotX550 b ON a.LotName=b.SN
208                 LEFT JOIN #WorkSourceSNT1 c ON a.SourceLotName=c.SourceSN
209             END
210         END
211     END
212     --2.3
213     IF @comdef<>‘‘
214     BEGIN
215         SELECT Val INTO #WorkComdef FROM fn_String_To_Table(@comdef,‘,‘,1)
216         --此@comdef条件求解出来的是SourceSN
217         SELECT SN AS SourceSN,MaterialID AS ComMaterials,VendorID,DateCode,SNNote INTO #WorkSourceSNT16 FROM CO_SN_GENERATION a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkComdef b WHERE a.MaterialID=b.Val)
218         ----------------------------------------------------------------------------------------------------
219         --条件判断(逻辑分析)开始
220         IF EXISTS(SELECT 1 FROM #FinalCO_SN)--如果前面判断的查询条件有值
221         BEGIN
222             SELECT a.LotName,a.SourceLotName,a.SNCust,a.MaterialID,a.ComMaterials,a.MESOrderID,a.OnPlantID,a.VendorID,a.DateCode,a.SNNote INTO #TMP516 FROM #FinalCO_SN a WHERE EXISTS (SELECT 1 FROM #WorkComdef b WHERE a.matl_def_id=b.Val)
223             DELETE FROM #FinalCO_SN
224             INSERT INTO #FinalCO_SN SELECT LotName,SourceLotName,SNCust,MaterialID,ComMaterials,MESOrderID,OnPlantID,VendorID,DateCode,SNNote FROM #TMP516
225         END
226         ELSE
227         BEGIN
228             IF EXISTS(SELECT 1 FROM #FinalLotName)
229             BEGIN
230             --查出SourceLotName对应的查询字段
231             SELECT a.SourceSN,a.VendorID,a.DateCode,a.SNNote,a.ComMaterials INTO #SourceLTX56 FROM #WorkSourceSNT16 a WHERE EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SourceSN=b.SourceLotName)
232             --查出SN对应的查询字段
233             SELECT SN,MaterialID,MESOrderID,OnPlantID INTO #WorkSNT5106 FROM CO_SN_GENERATION a WITH(NOLOCK)
234             WHERE SNType=‘IntSN‘ AND SNRuleName = ‘ProductSNRule‘ AND OnPlantID=@OnPlant
235             AND EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.LotName)
236
237             INSERT INTO #FinalCO_SN
238             SELECT a.LotName,a.SourceLotName,d.SNCust,b.MaterialID,c.ComMaterials,b.MESOrderID,b.OnPlantID,c.VendorID,c.DateCode,c.SNNote FROM #FinalLotName a
239             LEFT JOIN #WorkSNT5106 b ON a.LotName=b.SN
240             LEFT JOIN #WorkSourceSNT16 c ON a.SourceLotName=c.SourceSN
241             LEFT JOIN CO_SN_LINK_CUSTOMER d WITH(NOLOCK) ON a.LotName=d.SNMes
242
243             END
244             ELSE
245             BEGIN
246                 --已知SourceSN集合求解对应的SN和SNCust集合------------------------------------------
247                 SELECT LotPK AS SourceLotPK,LotName AS SrouceLotName INTO #WorkLotX5106 FROM MMLots WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkSourceSNT16 b WHERE b.SourceSN=MMLots.LotID)
248                 SELECT a.LotPK,a.SourceLotPK into #WorkLotX5206 FROM MMLotOperations a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #WorkLotX5106 b WHERE b.SourceLotPK=a.SourceLotPK)
249                 SELECT a.LotPK,a.SourceLotPK,b.SrouceLotName INTO #WorkLotX5306 FROM #WorkLotX5206 a JOIN #WorkLotX5106 b ON a.SourceLotPK=b.SourceLotPK
250
251                 INSERT INTO #FinalLotName SELECT b.LotName,a.SrouceLotName,NULL FROM #WorkLotX5306 a JOIN (SELECT LotPK,LotName FROM MMLots WITH(NOLOCK) ) b on a.LotPK=b.LotPK --b的里面加不加WHERE RowDeleted=0待确定
252
253                 SELECT a.LotName,a.SourceLotName,b.SNCust INTO #WorkLotX5406 FROM #FinalLotName a LEFT JOIN CO_SN_LINK_CUSTOMER b WITH(NOLOCK) ON a.LotName=b.SNMes
254                 DELETE FROM #FinalLotName
255                 INSERT INTO #FinalLotName SELECT LotName,SourceLotName,SNCust FROM #WorkLotX5406
256                 -------------------------------------------------------------------------------------
257                 SELECT SN,MaterialID,MESOrderID,OnPlantID INTO #WorkLotX5506 FROM CO_SN_GENERATION a WITH(NOLOCK)
258                 WHERE SNType=‘IntSN‘ AND SNRuleName = ‘ProductSNRule‘ AND OnPlantID=@OnPlant
259                 AND EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.LotName)
260
261                 INSERT INTO #FinalCO_SN
262                 SELECT a.LotName,a.SourceLotName,a.SNCust,b.MaterialID,c.ComMaterials,b.MESOrderID,b.OnPlantID,c.VendorID,c.DateCode,c.SNNote FROM #FinalLotName a
263                 LEFT JOIN #WorkLotX5506 b ON a.LotName=b.SN
264                 LEFT JOIN #WorkSourceSNT16 c ON a.SourceLotName=c.SourceSN
265             END
266         END
267     END
268
269     /**
270      * 3)条件判断结束
271      **/
272     IF EXISTS(SELECT 1 FROM #FinalLotName)
273     BEGIN
274         IF EXISTS(SELECT 1 FROM #FinalCO_SN)
275         BEGIN--3.1
276             SELECT a.matl_def_id,b.Descript,a.MESOrderID AS pom_order_id,a.SN AS LotName,a.SourceSN AS ComLot,
277                    a.ComMaterials,c.Descript AS ComMatDes,a.VendorID,a.DateCode,a.SNNote,
278                    OnPlantID,SNCust FROM #FinalCO_SN a
279                    JOIN MMDefinitions b WITH(NOLOCK) ON a.matl_def_id=b.DefID
280                    JOIN MMDefinitions c WITH(NOLOCK) ON a.ComMaterials=c.DefID
281             WHERE NOT EXISTS(select distinct SN, SourceSN from #FinalCO_SN x
282                              where x.SN = a.SourceSN and x.SourceSN = a.SN)
283         END
284         ELSE
285         BEGIN--3.2
286             --3.2.1求解SN的必查字段
287             SELECT SN,MaterialID,MESOrderID,OnPlantID INTO #FinalSNX1 FROM CO_SN_GENERATION a WITH(NOLOCK)
288             WHERE SNType=‘IntSN‘ AND SNRuleName = ‘ProductSNRule‘ AND OnPlantID=@OnPlant
289             AND EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.LotName)
290             --3.2.2求解SourceSN的必查字段
291             SELECT a.SN AS SourceLotName,a.VendorID,a.DateCode,a.SNNote,a.MaterialID AS ComMaterials INTO #FinalSNX2 FROM CO_SN_GENERATION a WITH(NOLOCK) WHERE EXISTS(SELECT 1 FROM #FinalLotName b WHERE a.SN=b.SourceLotName)
292
293             SELECT b.MaterialID AS matl_def_id,x.Descript,b.MESOrderID AS pom_order_id,b.SN AS LotName,c.SourceLotName AS ComLot,c.ComMaterials,y.Descript AS ComMatDes,c.VendorID,c.DateCode,c.SNNote,b.OnPlantID,a.SNCust
294             FROM #FinalLotName a
295             LEFT JOIN #FinalSNX1 b ON a.LotName=b.SN
296             LEFT JOIN #FinalSNX2 c ON a.SourceLotName=c.SourceLotName
297             JOIN MMDefinitions x WITH(NOLOCK) ON b.MaterialID=x.DefID
298             JOIN MMDefinitions y WITH(NOLOCK) ON c.ComMaterials=y.DefID
299             WHERE NOT EXISTS(
300                 SELECT DISTINCT * FROM #FinalLotName z
301                 WHERE z.LotName=a.SourceLotName and z.SourceLotName=a.LotName
302             )
303         END
304     END
305     ELSE
306     BEGIN
307         IF EXISTS(SELECT 1 FROM #FinalCO_SN)
308         BEGIN--3.3
309             SELECT a.matl_def_id,b.Descript,a.MESOrderID AS pom_order_id,a.SN AS LotName,a.SourceSN AS ComLot,
310                    a.ComMaterials,c.Descript AS ComMatDes,a.VendorID,a.DateCode,a.SNNote,
311                    OnPlantID,SNCust FROM #FinalCO_SN a
312                    JOIN MMDefinitions b WITH(NOLOCK) ON a.matl_def_id=b.DefID
313                    JOIN MMDefinitions c WITH(NOLOCK) ON a.ComMaterials=c.DefID
314             WHERE NOT EXISTS(select distinct SN, SourceSN from #FinalCO_SN x
315                              where x.SN = a.SourceSN and x.SourceSN = a.SN)
316         END
317         ELSE
318         BEGIN--3.4
319             PRINT ‘There is no queryable condition,please enter at less a query conditon.‘
320         END
321     END
322
323 END
324 GO

虽然牺牲了代码的可读性,但创造了性能价值。本人水平有限,还请各位不吝赐教!

最后,将SSRS报表替换成此存储过程后,SQL查询分析器是秒查的。B/S前端用时1~2秒!

四. 总结

平常的你是否偶尔会因急于完成任务而书写一堆性能极低的SQL语句呢?写出可靠性能的SQL语句不难,难的是习惯。

本文的优化思想很简单,关键点是避免全表扫描 & 注重SQL语句写法 & 索引,另外,如果你查询的表有可能会在查询时段更新,而实际业务需求允许脏读,可加with(nolock)预防查询被更新事物阻塞。

http://www.cnblogs.com/hangwei/p/4399238.html

时间: 04-08

实战:上亿数据如何秒查(转)的相关文章

实战:上亿数据如何秒查

最近在忙着优化集团公司的一个报表.优化完成后,报表查询速度有从半小时以上(甚至查不出)到秒查的质变.从修改SQL查询语句逻辑到决定创建存储过程实现,花了我3天多的时间,在此总结一下,希望对朋友们有帮助. 数据背景 首先项目是西门子中国在我司实施部署的MES项目,由于项目是在产线上运作(3 years+),数据累积很大.在项目的数据库中,大概上亿条数据的表有5个以上,千万级数据的表10个以上,百万级数据的表,很多- (历史问题,当初实施无人监管,无人监控数据库这块的性能问题.ps:我刚入职不久-)

上千万或上亿数据(有重复),统计其中出现次数最多的N个数据. C++实现

上千万或上亿的数据,现在的机器的内存应该能存下.所以考虑采用hash_map/搜索二叉树/红黑树等来进行统计次数.然后就是取出前N个出现次数最多的数据了,可以用第2题提到的堆机制完成. #include "IOSTREAM" #include<hash_map> #include<string> #include<map> using namespace std; int main(void) { //海量待统计数据 char* a[5]={&quo

上千万或上亿数据(有反复),统计当中出现次数最多的N个数据. C++实现

上千万或上亿的数据,如今的机器的内存应该能存下.所以考虑採用hash_map/搜索二叉树/红黑树等来进行统计次数. 然后就是取出前N个出现次数最多的数据了,能够用第2题提到的堆机制完毕. #include "IOSTREAM" #include<hash_map> #include<string> #include<map> using namespace std; int main(void) { //海量待统计数据 char* a[5]={&qu

servlet实现文件上传数据增删该查

控制层: 文件上传需要import org.apache.commons.fileuploadjar包 package com.product.dbutil.product.action; import java.io.File; import java.io.IOException; import java.io.PrintWriter; import java.util.ArrayList; import java.util.List; import java.util.Map; impor

Sphinx+Mysql+Php 12亿DNS数据秒查

最近得到一个接近12亿的全球ns节点的数据,本来想用来做一个全国通过dns反查域名然后进行全国范围的网站收集和扫描的,后来发现网站的数量不是很准确,加上一个人的精力和财力实在难以完成这样一个庞大的任务,就没有做下去,只留下了这个搭建的笔记.    文本格式,简单的文本搜索,速度太慢,一次搜索接近花掉5-10分钟时间,决定将其倒入数据库进行一次优化,速度应该能提升不到,电脑上只有AMP的环境,那么就决定将其倒入到mysql中,一开始使用Navicat进行倒入,刚好数据的格式是 ip,ns 这样的格

案例实战:每日上亿请求量的电商系统,JVM年轻代垃圾回收参数如何优化?

出自:http://1t.click/7TJ 目录: 案例背景引入 特殊的电商大促场景 抗住大促的瞬时压力需要几台机器? 大促高峰期订单系统的内存使用模型估算 内存到底该如何分配? 新生代垃圾回收优化之一:Survivor空间够不够 新生代对象躲过多少次垃圾回收后进入老年代? 多大的对象直接进入老年代? 别忘了指定垃圾回收器 今日思考题 1.案例背景引入 按照惯例,我们接下来会用案例驱动来带着大家分析到底该如何在特定场景下,预估系统的内存使用模型. 然后合理优化新生代.老年代.Eden和Surv

你的数据库数据量上亿,为了提高效率,要分库还是分表?具体怎么做 - 开源中国社区

你的数据库数据量上亿,为了提高效率,要分库还是分表?具体怎么做 - 开源中国社区 你的数据库数据量上亿,为了提高效率,要分库还是分表?具体怎么做

Redis基本使用及百亿数据量中的使用技巧分享

作者:依乐祝 原文地址:https://www.cnblogs.com/yilezhu/p/9941208.html 作者:大石头 时间:2018-11-10 晚上20:00 地点:钉钉群(组织代码BKMV7685)QQ群:1600800 内容:Redis基本使用及百亿数据量中的使用技巧分享 记录人:依乐祝 热场准备 熟悉的开场白,大家晚上好啊,今天给大家分享的是Redis在大数据中的使用,可能真正讲的是一些redis的使用技巧,Redis基本的一些东西. 首先给大家个地址,源码以及实例都在里面

Redis基本使用及百亿数据量中的使用技巧分享(附视频地址及观看指南)

作者:依乐祝原文地址:https://www.cnblogs.com/yilezhu/p/9941208.html 主讲人:大石头 时间:2018-11-10 晚上20:00 地点:钉钉群(组织代码BKMV7685)QQ群:1600800 内容:Redis基本使用及百亿数据量中的使用技巧分享 记录人:依乐祝 热场准备 熟悉的开场白,大家晚上好啊,今天给大家分享的是Redis在大数据中的使用,可能真正讲的是一些redis的使用技巧,Redis基本的一些东西. 首先给大家个地址,源码以及实例都在里面